Table of Contents - SmartBlock Product and Design Manual June 2002 edition

American ConForm Industries
Makers of SmartBlock™
1-800-CONFORM e-mail:

SmartBlock Design and Product Manual

TABLE OF CONTENTS	You will need Acrobat Reader to be able to print this Manual or to see drawings. Download free Acrobat Reader now.
Chapter 1 INTRODUCTION
Chapter 2
SITE WORK & FOUNDATIONS
Chapter 3
BUILDING WALLS
A) Bracing Techniques 1
B) Bracing Techniques 2
C) Bracing Techniques 3
Chapter 4
INTERIOR FINISHES
Chapter 5
DOORS & WINDOWS
Chapter 6
EXTERIOR FINISH MATERIALS
Chapter 7
PLUMBING & ELECTRICAL
Chapter 8
MANUFACTURER'S SPECIFICATIONS
Chapter 9
DESIGN DETAILS
9.1 Design Section
9.2.A Design Section from 1.0 to 3.0
9.2.B Design Section from 4.0 to 6.0
9.2.C Design Section from 7.0 to 9.0
9.2.D Design Section from 10.0 to 12.0
9.2.E Design Section from 13.0 to 15.0
9.2.F Design Section from 16.0 to 18.0
9.2.G Design Section from 19.0 to 20.0
9.2.H Design Section from 21.0 to 23.0
Chapter 10
SUPPORT REPORTS
10.1 ICBO ES Evaluation Report No. 4572
10.2 BOCA Research Report No. 95-46
10.3 Wisconsin DILHR Material Approval No. 920083
10.4 Los Angeles Research Report No. 25006
10.5 Texas Dep. of Insurance – Product Evaluation FR-24
10.6 Structural Design Calculations for SF10 Series
10.7 CSI Technical Specifications